• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Giải giúp mình bài lab định tuyến này với ! ( sub-interfaces )

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Giải giúp mình bài lab định tuyến này với ! ( sub-interfaces )

    Em có 1 bài lab cấu hình định tuyến giữa các vùng .
    - Trong vùng RIPv2 có router được nối với switch có chia vlan. Sau khi cấu hình sub-interfaces , trunking ,.... các thứ thì giữa các vlan thấy nhau rồi , em tiếp tục cấu hình ripv2 giữa các router trong vùng
    2 router có vlan và 1 router k nối với vlan nào . Sau khi em cấu hình xong thì ripv2 không chạy. Em nghi là do có sub-interfaces nên nó không học được đường mạng .
    - Em có bài lab bằng packet tracer trong file đính kèm ( Đã dựng mô hình và cấu hình hết ) , anh xem dùm em nhé và hướng dẫn em cách cấu hình .

    Cám ơn trước !




  • #2
    Chào bạn,

    File cấu hình của bạn xài packet tracer version cũ quá, nên mình down về không mở lên được, bạn copy file text cấu hình để mình tiện theo dõi và troubleshoot cho bạn nhé.
    Nguyễn Thị Thanh Minh,
    Support Teams

    Email :thanhminh@vnpro.org

    Viet Professionals Co. Ltd. VnPro ®
    ---------------------------------------
    149/1D Ung Văn Khiêm P25 Q.Bình Thạnh TPHCM
    Tel: (08) 35124257
    Fax: (08) 5124314
    Home Page : http://www.vnpro.vn
    Support forum : http://vnpro.org
    LiveChat : http://www.vnpro.vn/support
    Wifi forum : http://wifipro.org
    Blog : http://vnpro.org/blog

    Comment


    • #3
      File của em dùng là Packet tracer ver 5.3.2 mà anh Minh :
      Ok để em copy cấu hình như sau

      Click image for larger version

Name:	hinh1.jpg
Views:	1
Size:	261.1 KB
ID:	205605


      R0:
      PHP Code:
      interface FastEthernet0/0
       no ip address
       duplex auto
       speed auto
      !
      interface 
      FastEthernet0/0.2
       encapsulation dot1Q 2
       ip address 192.168.2.1 255.255.255.0
       no ip split
      -horizon
      !
      interface 
      FastEthernet0/0.3
       encapsulation dot1Q 3
       ip address 192.168.3.1 255.255.255.0
       no ip split
      -horizon
      !
      interface 
      FastEthernet0/0.4
       encapsulation dot1Q 4
       ip address 192.168.4.1 255.255.255.0
       no ip split
      -horizon
      !
      interface 
      FastEthernet0/1
       ip address 192.168.10.1 255.255.255.0
       duplex auto
       speed auto
      !
      interface 
      Vlan1
       no ip address
       shutdown
      !
      router rip
       version 2
       network 192.168.2.0
       network 192.168.3.0
       network 192.168.4.0
       network 192.168.10.0
       no auto
      -summary
      !
      ip classless 
      R1 :

      PHP Code:
      interface Loopback0
       ip address 1.1.1.1 255.255.255.255
      !
      interface 
      FastEthernet0/0
       no ip address
       duplex auto
       speed auto
      !
      interface 
      FastEthernet0/0.5
       encapsulation dot1Q 5
       ip address 192.168.5.1 255.255.255.0
       no ip split
      -horizon
      !
      interface 
      FastEthernet0/0.6
       encapsulation dot1Q 6
       ip address 192.168.6.1 255.255.255.0
       no ip split
      -horizon
      !
      interface 
      FastEthernet0/1
       ip address 192.168.10.2 255.255.255.0
       duplex auto
       speed auto
      !
      interface 
      FastEthernet1/0
       ip address 192.168.12.1 255.255.255.0
       duplex auto
       speed auto
      !
      interface 
      FastEthernet1/1
       no ip address
       duplex auto
       speed auto
       shutdown
      !
      interface 
      Vlan1
       no ip address
       shutdown
      !
      router rip
       version 2
       network 1.0.0.0
       network 192.168.5.0
       network 192.168.6.0
       network 192.168.10.0
       network 192.168.12.0
       no auto
      -summary
      !
      ip classless 
      R2 :

      PHP Code:
      interface Loopback0
       ip address 2.2.2.2 255.255.255.255
      !
      interface 
      FastEthernet0/0
       ip address 192.168.12.2 255.255.255.0
       duplex auto
       speed auto
      !
      interface 
      FastEthernet0/1
       ip address 192.168.23.1 255.255.255.0
       duplex auto
       speed auto
      !
      interface 
      FastEthernet1/0
       ip address 192.168.24.1 255.255.255.0
       duplex auto
       speed auto
      !
      interface 
      FastEthernet1/1
       no ip address
       duplex auto
       speed auto
       shutdown
      !
      interface 
      Vlan1
       no ip address
       shutdown
      !
      router rip
       version 2
       network 2.0.0.0
       network 192.168.12.0
       no auto
      -summary
      !
      ip classless 

      Comment


      • #4
        nguyên nhân bài lab bạn không chạy chính là do vấn đề cable bạn à.
        Bạn thay cáp giữa 2 router bằng cáp chéo nhé. Gắn cáp thẳng thế kia làm sao nó chạy.
        Nguyễn Bá Hiển
        Email: nguyenbahien@vnpro.org
        Yahoo: nguyenbahien_vnpro
        ------------------------------------------------------------------------------------------------------------
      Trung Tâm Tin Học VnPro
      149/1D Ung Văn Khiêm P25 Q.Bình thạnh TPHCM
      Tel : (08) 35124257 (5 lines)
      Fax: (08) 35124314

      Home page: http://www.vnpro.vn
      Support Forum: http://www.vnpro.org
      - Chuyên đào tạo quản trị mạng và hạ tầng Internet
      - Phát hành sách chuyên môn
      - Tư vấn và tuyển dụng nhân sự IT
      - Tư vấn thiết kế và hỗ trợ kỹ thuật hệ thống mạng

      Network channel: http://www.dancisco.com
      Blog: http://www.vnpro.org/blog

      Comment


      • #5
        chắc tại làm bên GNS3 hoài nên nhầm rồi :( thanks bạn !

        Comment

        • Working...
          X