• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

chuong 4 -s3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • chuong 4 -s3

    What is the effect of adding additional hosts to a half-duplex Ethernet network? (Choose three.)


    1.collisions increase
    2. collisions decrease
    3. jam signals increase
    4. jam signals decrease
    5. throughput decreases
    6. throughput increases

    -----------------

    How does an Ethernet bridge handle an incoming frame? (Choose three.)
    1 The source MAC address and input interface pair are added to the bridging table.
    2 The destination MAC address and input interface pair are added to the bridging table.
    3 If no match to the destination MAC address is found in the bridging table, the frame is discarded.
    4 If no match to the destination MAC address is found in the bridging table, the frame is flooded out all other interfaces.
    5 If a match to the destination MAC address is found in the bridging table, the frame is forwarded out the associated interface.
    6 If a match to the source MAC address is found in the bridging table, the frame is forwarded to all ports.

    ------------
    Giai dap

  • #2
    RE: chuong 4 -s3

    Một hệ thống mạng đang chạy half-duplex, nếu thêm host vào, sẽ gia tăng collision. Số tín hiệu jam sẽ tăng và dẫn đến thông lượng (through-put) sẽ giảm
    The beautiful thing about learning is that no one can take it away from you. (B.B. King)

    Comment


    • #3
      RE: chuong 4 -s3

      CÂu trên là 1, 3, 5. Switch là một collision domain mạ

      Comment


      • #4
        chào

        Một port của switch là một collision domain.

        Cả một switch sẽ là một broadcast domain

        Comment


        • #5
          Re: chuong 4 -s3

          [qoute]
          How does an Ethernet bridge handle an incoming frame? (Choose three.)
          1 The source MAC address and input interface pair are added to the bridging table.
          2 The destination MAC address and input interface pair are added to the bridging table.
          3 If no match to the destination MAC address is found in the bridging table, the frame is discarded.
          4 If no match to the destination MAC address is found in the bridging table, the frame is flooded out all other interfaces.
          5 If a match to the destination MAC address is found in the bridging table, the frame is forwarded out the associated interface.
          6 If a match to the source MAC address is found in the bridging table, the frame is forwarded to all ports.

          ------------
          Giai dap[/quote]

          Đáp án ở đây là 1,4,5. Bridge và switch hoạt động như sau:
          - Khi bảng địa chỉ(CAM Table) trống, bridge và switch sẽ học địa chỉ như sau: KHi có 1 incoming frame đến 1 port của nó, nó tìm trong bảng CAM xem có địa chỉ Source MAC chưa, nếu chưa có, nó sẽ lưu địa chỉ source MAC address và port. Nó tìm trong bảng CAM cho địa chỉ destination MẠC Nếu không có, nó sẽ flood ra toàn mạng với địa chỉ destination MAC đó. Nó được gọi là unknown unicast flooding. Host nào có đúng destination MAC sẽ reply lai. Switch hoặc bridge sẽ add MAC address và port gắn với host đó lại, và các incoming frame sau sẽ được forward ra đúng port gắn với địa chỉ MAC đó.
          Trăm năm bia đá cũng mòn
          Bia chai cũng bể, chỉ còn bia ôm!

          Comment

          Working...
          X