• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

PIX/ASA LAB guide

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    PIX/ASA LAB guide

    Not quite:Youll need to define a global pool and use it in your nat instead of the nat "0" which tells the pix NOT to nat on traffic matching that acl...Should look something like this:access-list inside_out permit tcp host 10.10.200.201 eq telnet host xx.xx.xx.xx anyglobal outside 1 outsidenat inside 1 access-list inside_outThere are variants on how to accomplish this check the command references for PIX on ciscos website but this should work.Ammo
    http://itqueries.com/

    Comment

    Working...
    X