• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Làm sao để đổi password Router?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    Anh Minh cho tôi hỏi làm thế nào để tạo ra "MD5 password". Ví dụ như: "ciscorouter(config)# username ciscoadmin secret 5 $1$feb0$a104Qd9UZ./Ak00KTggPD0". Tôi đã thử các MD5 Encode online nhưng khi copy chuỗi đó vào cấu hình, router đều không nhận lệnh. Chuỗi MD5 password: "$1$feb0$a104Qd9UZ./Ak00KTggPD0" tạo ra như thế nào?
    Last edited by vtelezoo; 13-10-2011, 09:05 PM.

    Comment


    • #62
      bạn thử đánh lệnh này xem
      confreg 0x2142
      enable
      copy run start
      config t
      enable secret mat_khau_moi
      configt-register 0x2102
      ctrl+z
      copy run start

      Comment


      • #63
        Đơn giản mà bạn.
        Bạn hỏi câu muốn thay đổi mật khẩu thì mình ko biết mật khẩu nào cả. Có nhiều cấp độ pas lắm: mod privileged,pas telnet...

        Gỡ bỏ pas: thì như là cấu hình pass thôi,thêm no đăng trước, VD: >conf t ; >No ena pass hoặc >conf t; >line vty 0 4; >no pass..

        Sau rồi cấu hình lại nếu muốn

        Comment


        • #64
          Originally posted by vtelezoo View Post
          Anh Minh cho tôi hỏi làm thế nào để tạo ra "MD5 password". Ví dụ như: "ciscorouter(config)# username ciscoadmin secret 5 $1$feb0$a104Qd9UZ./Ak00KTggPD0". Tôi đã thử các MD5 Encode online nhưng khi copy chuỗi đó vào cấu hình, router đều không nhận lệnh. Chuỗi MD5 password: "$1$feb0$a104Qd9UZ./Ak00KTggPD0" tạo ra như thế nào?
          hehe, mật khẩu bị mã hóa ấy mà.

          Vào
          >conf t
          > ena sec matkhaucanmahoa
          vậy thui

          Comment


          • #65
            Originally posted by macvanhien View Post
            bạn thử đánh lệnh này xem
            confreg 0x2142
            enable
            copy run start
            config t
            enable secret mat_khau_moi
            configt-register 0x2102
            ctrl+z
            copy run start
            Tại sao bạn lại phải đặt pass mã hóa ở thanh ghi x2142 vậy?
            Cấu hình luôn ko đc sao?:)

            Comment

            Working...
            X