• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Hướng dẫn sử dụng GNS3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    sao em down file ios của router 2600, 2691, nhưng bây giờ làm sao em plugin thêm card serial,vào, mong được giúp đở

    Comment


    • #32
      hi

      Originally posted by ducminh08 View Post
      mình có vấn đề về telnet khi xài NGS3
      mình tạo ra 3 router 1721
      khi telnet /all thì chỉ có 2 cái là vào được đền CLI của router
      còn 1 cái thì kô được (thường là cái cuối)

      tương tự như với xài dynamips/dynagen
      Code:
      [localhost:7200]
      [[1721]]
      image = c:\C1700.bin
      ram = 32
      [[router R1]]
      model = 1721
      console = 2000
      mình chỉ viết 1 đoạn đơn giản như vậy
      nnhưng khi chạy lên và đánh lệnh telnet R1
      thì nó có hiển thị của sổ telnet nhưng kô thê vào CLI của router được

      có cách nào giải quyết không ???

      Minh cung bi y chang truong hop nay, co cach nao giai quyet khong nhi!

      Comment


      • #33
        co ban nao chi minh cach ket noi tu CRT vao GNS3 voi minh co lam giong mot so huong dan ma tren forum ma ko chay

        Comment


        • #34
          Anh Phúc biết cách kết hợp với CRT ko. Và cách dung Vpc ko.

          Comment


          • #35
            Ai gặp lỗi giả lập PIX như mình không nhỉ, chỉ mình cách khắc phục với !
            khi Start FW0 thì nó báo
            Code:
            ***Error: 209-unable to start instance 'FW0'
            Đã thử qua mấy cái image pix802 và 722 rồi vẫn không ăn thua :(

            Thanks
            Last edited by thanhbobo; 01-11-2008, 02:03 AM.
            CCNA: 10/2008
            CCNP:
            BSCI
            ONT
            CCSP:
            SND

            Comment


            • #36
              Originally posted by anh29881 View Post
              co ban nao chi minh cach ket noi tu CRT vao GNS3 voi minh co lam giong mot so huong dan ma tren forum ma ko chay
              Bạn tạo 1 script: securecrt.vbs đặt vào thư mục GNS3
              Code:
              ----------------------------
              #$Language="VBScript"
              #$Interface="1.0"

              Sub main

              crt.window.caption = crt.arguments(0)

              End Sub
              ------------------------------
              và sử dụng command
              start C:\progra~1\SecureCRT\SecureCRT.EXE /script C:\progra~1\gns3\securecrt.vbs /arg %d /telnet %h %p


              (Tham khảo tại http://7200emu.hacki.at/viewtopic.ph...723fe067a821c3)

              Comment


              • #37
                Originally posted by thanhbobo View Post
                Ai gặp lỗi giả lập PIX như mình không nhỉ, chỉ mình cách khắc phục với !
                khi Start FW0 thì nó báo
                Code:
                ***Error: 209-unable to start instance 'FW0'
                Đã thử qua mấy cái image pix802 và 722 rồi vẫn không ăn thua :(

                Thanks
                Mình đã khắc phục được lỗi này bằng cách vào Preferences, Pemu, thay đổi Working Directory thành Program Files/GNS3/Dynamips/ :D Sướng tỉnh người !!

                GNS3 -beta 0.6
                Code:
                http://www.gns3-labs.com/wp-content/uploads/2008/misc/GNS3-Labs.Com-GNS3-beta-0.6-win32-all-in-one.rar
                Last edited by thanhbobo; 01-11-2008, 02:54 AM.
                CCNA: 10/2008
                CCNP:
                BSCI
                ONT
                CCSP:
                SND

                Comment


                • #38
                  Mình vào http://www.gns3.net/download vẫn chỉ thấy gns3 v0.5, bồ làm thế nào có 0.6 hay vậy?

                  Comment


                  • #39
                    Mình xem ở trang này đó bạn :D
                    CCNA: 10/2008
                    CCNP:
                    BSCI
                    ONT
                    CCSP:
                    SND

                    Comment


                    • #40
                      ehhehe! Bác TranMyPhuc này PRO lắm! ehehhehe! Các Pro khác cũng loi gương để anh em đi sau như bọn em được học hỏi nha!

                      Comment


                      • #41
                        Khi chạy GNS3 và start 1 Router thì làm sau mà giảm PF Usage xuống thấp
                        Mong mọi người giúp đỡ

                        Comment


                        • #42
                          Originally posted by warwin86 View Post
                          Khi chạy GNS3 và start 1 Router thì làm sau mà giảm PF Usage xuống thấp
                          Mong mọi người giúp đỡ
                          Chào,
                          Bạn click chuột phải vào router và chọn idlepc . Chọn thông số có dấu *

                          Chúc bạn may mắn và vui vẻ.
                          Trần Mỹ Phúc
                          tranmyphuc@hotmail.com
                          Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

                          Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

                          Juniper Certs :
                          JNCIP-ENT & JNCIP-SEC
                          INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

                          [version 4.0] Ôn tập CCNA


                          Comment


                          • #43


                            Anh ơi cho hỏi làm sao giảm cái trong hình

                            còn cái cpu usage thì dùng idle pc thì ok rồi

                            nhưng cái thằng PF usage thì nó tăng lên dữ quá làm sao giảm xuống

                            Comment


                            • #44
                              Originally posted by warwin86 View Post


                              Anh ơi cho hỏi làm sao giảm cái trong hình

                              còn cái cpu usage thì dùng idle pc thì ok rồi

                              nhưng cái thằng PF usage thì nó tăng lên dữ quá làm sao giảm xuống
                              Chào,
                              Bạn chỉ có thể tăng RAM ảo cho máy thôi hoặc mua Ram mới gắn thêm vào.

                              Hiện không có chức năng giảm dung lượng RAM

                              Chúc bạn vui.
                              Trần Mỹ Phúc
                              tranmyphuc@hotmail.com
                              Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

                              Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

                              Juniper Certs :
                              JNCIP-ENT & JNCIP-SEC
                              INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

                              [version 4.0] Ôn tập CCNA


                              Comment


                              • #45
                                Originally posted by warwin86 View Post


                                Anh ơi cho hỏi làm sao giảm cái trong hình

                                còn cái cpu usage thì dùng idle pc thì ok rồi

                                nhưng cái thằng PF usage thì nó tăng lên dữ quá làm sao giảm xuống

                                Đây là một đoạn mình copy trong GNS3 manual

                                Building More Complex Topologies

                                Although a single router is useful to get familiar with commands, it would be nice to build more complex topologies.
                                With GNS3 very complex topologies may be built. Just as performance when running virtual machines within VMware or
                                Virtual PC depends on your computer resources, running many router instances will affect the performance of your
                                computer. The faster your CPU and the more RAM that you have, the better. However, idlepc does a lot to help with
                                CPU usage. Ghostios and sparsemem are two additional utilities that will help with RAM usage. Ghostios is enabled by
                                default in GNS3. Sparsemem must be enabled, since it is off by default. These will be discussed in detail in the section on
                                Memory Usage. As an example, with 2 Gigabytes of RAM and a 2.5 GHz processor, you should have no problems running
                                a lab with good performance with a half dozen routers and several workstations.

                                Memory Usage

                                The Ghostios option can significantly reduce the amount of real host RAM needed for labs with multiple routers running
                                the same IOS image. With this feature, instead of each virtual router storing an identical copy of IOS in its virtual RAM,
                                the host will allocate one shared region of memory that they will all utilize. So for example, if you are running 10 routers
                                all with the same IOS image, and that image is
                                60 MB in size you will save 9*60 = 540 MB of
                                real RAM when running your lab. Ghostios is
                                enabled, by default, in GNS3.

                                real memory, but instead reduces the amount
                                of virtual memory used by your router
                                instances. This can be important, because your
                                OS limits a single process to 2 GB of virtual
                                memory on 32-bit Windows, and 3 GB on 32-bit
                                Linux. Enabling sparsemem only allocates virtual
                                memory on the host that is actually used by the
                                IOS in that router instance, rather than the
                                entire amount of RAM configured. This can
                                allow you to run more instances.
                                Both features rely on mmap, so this must also
                                be enabled. Select Preferences under the Edit
                                menu within GNS3. Check the appropriate
                                boxes to enable these features.

                                Comment

                                Working...
                                X