• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Cisco 2960 log shows some port always be up/down

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cisco 2960 log shows some port always be up/down

    Our company have a core switch cisco 3750 (bought from 3anetwork.com, but this switch is work well now, so i don't know if they would help me to solve this problem, whatever i will try latter if necessary) to access 3 2960 switches. Now the 3 2960 switches’ log show some ports be up/down, anyone know why?

    Note: terminal did not display off net.

    2960log:

    2960-1#sh log
    Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
    No Active Message Discriminator.

    No Inactive Message Discriminator.

    Console logging: level debugging, 1162027 messages logged, xml disabled,
    filtering disabled
    Monitor logging: level debugging, 0 messages logged, xml disabled,
    filtering disabled
    Buffer logging: level debugging, 1162027 messages logged, xml disabled,
    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    File logging: disabled
    Persistent logging: disabled
    Trap logging: level informational, 1162030 message lines logged

    Log Buffer (4096 bytes):
    nterface GigabitEthernet0/7, changed state to up
    Jul 10 15:02:42.943: %LINK-3-UPDOWN: Interface GigabitEthernet0/6, changed state to up
    Jul 10 15:02:43.950: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/6, changed state to up
    Jul 10 15:03:21.304: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to down
    Jul 10 15:03:22.302: %LINK-3-UPDOWN: Interface GigabitEthernet0/7, changed state to down
    Jul 10 15:03:24.752: %LINK-3-UPDOWN: Interface GigabitEthernet0/7, changed state to up
    Jul 10 15:03:25.759: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to up
    Jul 10 15:04:54.611: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:04:56.616: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:05:09.677: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:05:11.682: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:06:54.610: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:06:56.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:07:15.682: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:07:17.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:08:18.479: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:08:20.484: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:08:48.628: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:08:50.633: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:09:54.587: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:09:56.592: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:11:54.620: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:11:56.625: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:13:27.348: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to down
    Jul 10 15:13:28.346: %LINK-3-UPDOWN: Interface GigabitEthernet0/7, changed state to down
    Jul 10 15:13:30.653: %LINK-3-UPDOWN: Interface GigabitEthernet0/7, changed state to up
    Jul 10 15:13:31.659: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to up
    Jul 10 15:14:06.321: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to down
    Jul 10 15:14:07.319: %LINK-3-UPDOWN: Interface GigabitEthernet0/7, changed state to down
    Jul 10 15:14:09.752: %LINK-3-UPDOWN: Interface GigabitEthernet0/7, changed state to up
    Jul 10 15:14:10.759: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to up
    Jul 10 15:14:54.597: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:14:56.602: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:15:03.070: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:15:05.075: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:18:54.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:18:56.584: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
    Jul 10 15:19:00.090: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
    Jul 10 15:19:02.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up

  • #2
    Hi brother, 2960 switch access to computer, right? It must be a problem with line cable or network card, check it.

    Comment


    • #3
      cảm ơn chủ thớt, bài viết này thật là bổ ích kinh nghi

      Comment


      • #4
        cảm ơn chủ thớt đã chia sẻ nhé :V bài viết rất bổ ích
        máy tính để bàn - lap dat phong net - phòng net game - thiết kế phòng net đẹp

        Comment

        Working...
        X