• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Mot so thac mac ve QoS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mot so thac mac ve QoS

    Hi all
    Mình có t1 số hắc mắc về QoS nhờ mọi người trả lời giùm
    - Có phải chỉ có gói tin từ trunking port mới có trường CoS bit, đối với layer3 interface hoặc access port thì gói tin ko có trường CoS
    - Nếu port ở chế độ no trust CoS thì gói tin ko có CoS sẽ được gán CoS default (thường là 0), tuy nhiên nếu ko cấu hình gì QoS (QoS global disable) thì CoS của gói tin có bị thay đổi ntn?
    - LAN port thường dùng CoS để queuing (WRR) & congestion advoice (WRED). Tuy nhiên nếu gói tin ko có giá trị CoS thì xử lí thế nào
    - Nếu trên LAN port ta apply đồng thời queuing WRR và CBWFQ (class based weight fair queue) thì Qos được xử lí thế nào.
    Nếu ai có tài liệu về các thắc mắc này thì share cho mình với

    Cảm ơn mọi người đã đọc bài và trả lời

  • #2
    hi bigbang

    Bigbang đọc một số thông tin về quá trình phân loại (classification) ở đây trước:



    về tài liệu tham khảo, bigbang nên tìm đọc quyển sách xuất sắc nhất về QoS của Welldel Odom

    Cisco Press DQoS.
    Đặng Quang Minh, CCIEx2#11897 (Enterprise Infrastructure, Wireless), DEVNET, CCSI#31417

    Email : dangquangminh@vnpro.org
    https://www.facebook.com/groups/vietprofessional/

    Comment


    • #3
      Thank anh Quang Minh
      Em cũng đã trả lời được 2 câu hỏi đầu tiên
      1. Có phải chỉ có gói tin từ trunking port mới có trường CoS bit, đối với layer3 interface hoặc access port thì gói tin ko có trường CoS -> Đúng
      2. Nếu port ở chế độ no trust CoS thì gói tin ko có CoS sẽ được gán CoS default (thường là 0) => Không đúng. Port sẽ dùng CoS default để tạo DSCP cho gói tin (mapping). Gói tin vẫn ko có CoS
      tuy nhiên nếu ko cấu hình gì QoS (QoS global disable) thì CoS của gói tin có bị thay đổi ntn????

      Đoạn này là tài liệu từ Cisco:

      Cho câu hỏi 1:


      The following terms are used when discussing QoS features:

      •Packets carry traffic at Layer 3.

      •Frames carry traffic at Layer 2. Layer 2 frames carry Layer 3 packets.

      •Labels are prioritization values carried in Layer 3 packets and Layer 2 frames:

      –Layer 2 class of service (CoS) values, which range between zero for low priority and seven for high priority:

      Layer 2 Inter-Switch Link (ISL) frame headers have a 1-byte User field that carries an IEEE 802.1p CoS value in the three least significant bits.

      Layer 2 802.1Q frame headers have a 2-byte Tag Control Information field that carries the CoS value in the three most significant bits, which are called the User Priority bits.

      Other frame types cannot carry Layer 2 CoS values.

      Note On interfaces configured as Layer 2 ISL trunks, all traffic is in ISL frames. On interfaces configured as Layer 2 802.1Q trunks, all traffic is in 802.1Q frames except for traffic in the native VLAN.

      –Layer 3 IP precedence values—The IP version 4 specification defines the three most significant bits of the 1-byte ToS field as IP precedence. IP precedence values range between zero for low priority and seven for high priority.

      –Layer 3 differentiated services code point (DSCP) values—The Internet Engineering Task Force (IETF) has defined the six most significant bits of the 1-byte IP ToS field as the DSCP. The per-hop behavior represented by a particular DSCP value is configurable. DSCP values range between 0 and 63 (see the "Configuring DSCP Maps" section).

      Note Layer 3 IP packets can carry either an IP precedence value or a DSCP value. QoS supports the use of either value, since DSCP values are backwards compatible with IP precedence values

      Cho cau hoi 2





      Con 2 cau hoi nua, moi nguoi cung trao doi nhe
      Tks

      Comment

      Working...
      X