• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Ospf

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ospf

    Bạn nào có tài liệu về network type share mình với,đọc slide cisco hoài ko hiểu?

  • #2
    Originally posted by tinhcuphoiphai1
    Network type là gì bạn? Các loại network à. ...
    Có lẽ vậy :D

    Comment


    • #3
      Network type là LSA từ 1-11 đó bạn

      Comment


      • #4
        Hi bạn,

        Network-type của OSPF bao gồm:
        1/BROADCAST (nếu là mạng Ethernet,FastEthernet, GigaEthernet --> default network-type là BROADCAST)
        2/NON-BROADCAST (nếu là mạng FrameRelay,ATM --> default network-type là NON-BROADCAST)
        3/POINT-TO-POINT
        4/POINT-TO-MultiPOINT
        5/POINT-TO-MUltiPOINT Non-Broadcast
        6/LOOPBACK
        Để xem network-type của interface, bạn sử dụng command:
        # sh ip ospf interface xx/yy | inc NETWORK-TYPE

        Để 2 router có thể thiếp lập đc neighbor với nhau, thì network-type phải tương thích (compatible),không cần phải giống nhau . Cụ thể:
        Nhóm 1: BROADCAST và NON-BROADCAST : tương thích
        Nhóm 2: POINT-TO-*: tương thích

        Comment

        Working...
        X