Sao tren con 7200 khong the tao dialer

[alovend]

Chào các bạn ,
Tôi cân dùng con 7200 để làm PPPoA client nhưng khổ nỗi khi config client thì nó không có hỗ trợ dialer. Tôi cần phải làm sao đây.
Mong các bạn chỉ giúp

reg7200(config-subif)#pvc 0/34
reg7200(config-if-atm-vc)#encapsulation aal5mux ppp dialer
^
% Invalid input detected at '^' marker.

reg7200(config-if-atm-vc)#encap
reg7200(config-if-atm-vc)#encapsulation aal
reg7200(config-if-atm-vc)#encapsulation aal5m
reg7200(config-if-atm-vc)#encapsulation aal5mux ?
ip IP

reg7200(config-if-atm-vc)#encapsulation aal5mux pp
reg7200(config-if-atm-vc)#encapsulation aal5mux pp
reg7200(config-if-atm-vc)#encapsulation aal5mux pp
reg7200(config-if-atm-vc)#encapsulation aal5mux ?
ip IP

reg7200(config-if-atm-vc)#encapsulation aal5mux ip ?
<cr>

[doc_co_cau_bai]

phải cho phép vpdn trước nha

hostname Client-L

!

vpdn enable

!

vpdn-group 1

request-dialin

protocol pppoe

!

sau đó mới tạo interface dialer



interface Dialer1

mtu 1492

ip address 203.162.3.1 255.255.255.0

ip nat outside

encapsulation ppp

dialer pool 1

dialer-group

[alovend]

Configuring from terminal, memory, or network [terminal]? ter
Enter configuration commands, one per line. End with CNTL/Z.
reg7200(config)#vpdn enable
reg7200(config)#int ATM3/0.34
reg7200(config-subif)#pvc atm 0/34
reg7200(config-if-atm-vc)#enca
reg7200(config-if-atm-vc)#encapsulation aal5m
reg7200(config-if-atm-vc)#encapsulation aal5mux p
reg7200(config-if-atm-vc)#encapsulation aal5mux p
reg7200(config-if-atm-vc)#encapsulation aal5mux p
reg7200(config-if-atm-vc)#encapsulation aal5mux p
reg7200(config-if-atm-vc)#encapsulation aal5mux p
reg7200(config-if-atm-vc)#encapsulation aal5mux p
reg7200(config-if-atm-vc)#encapsulation aal5mux p
reg7200(config-if-atm-vc)#exit
reg7200(config-subif)#exit
reg7200(config)#exit
reg7200#

[doc_co_cau_bai]

aloveend gõ lệnh show version giùm mình cái

[alovend]

reg7200#show version
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IK2S-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 23:29 by phanguye
Image text-base: 0x60008900, data-base: 0x6150E000

ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105], DEVELOPMENT SOFTWARE
BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(2)XE2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

reg7200 uptime is 1 week, 3 days, 22 hours, 50 minutes
System returned to ROM by power-on at 14:03:26 UTC Mon Aug 13 2001
System image file is "slot0:c7200-ik2s-mz.120-7.T"

cisco 7206VXR (NPE300) processor with 253952K/40960K bytes of memory.
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
6 slot VXR midplane, Version 2.0

Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
4 Ethernet/IEEE 802.3 interface(s)
2 FastEthernet/IEEE 802.3 interface(s)
3 ATM network interface(s)
125K bytes of non-volatile configuration memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x102

reg7200#

Co van de gi voi IOS ha ban?

Than,

[doc_co_cau_bai]

alovend thay IOS Enterprise Plus (-js-) vào là ok.

[alovend]

Làm sao có thể kiếm được IOS khác đựoc hả ban. Bạn có biết chỗ nào có thể download đựoc không?
Cám ơn nhe !

[danguyennhi]

bạn hãy liên lạc với nhà cung cấp thiết bị đề nghị họ hỗ trợ nhé.