kyen_fit
22-08-2007, 01:08 AM
Mình chưa rõ đề thi này yêu cầu gì mong các bạn có thể giúp mình với vì minh đang sắp thi hết kỳ 2 .Thanks
Routing
Use RIP for gateway, Core, Distribute1,Distribute2.
1. Make sure the entire network can connect to the Internet via Gateway’s Loopback0 interface
2. Core do not use static route and must have DNS server , configure network setting for WS_3 and makse your router a web server.
3. make sure the entire network can connect to each other by using proper routing mechanism.
4. routers Access1 do not use routing protocols, make sure they can connect t other networks, set the routers to use DNS server, configure network setting for WS_4 and make your router a web server.
ACL :
1. Gateway: allow all traffic except ping and FTP access from the internet
2. Core: only allow Core’s Ethernet network to access router Core via web
3. Distribute1: allow all traffic from Access1 to go in serial interface except ftp and tftp service to key network devices (lower IP half) of SW_2 Ethernet network
4. Distribute2: allow all traffic Access1 to go through except http and tftp service to key network devices (lower IP half) of Access1 Ethernet network
5. Access1: only allow key network devices(lower IP halves) in any subnets to telnet to router Access1
Routing
Use RIP for gateway, Core, Distribute1,Distribute2.
1. Make sure the entire network can connect to the Internet via Gateway’s Loopback0 interface
2. Core do not use static route and must have DNS server , configure network setting for WS_3 and makse your router a web server.
3. make sure the entire network can connect to each other by using proper routing mechanism.
4. routers Access1 do not use routing protocols, make sure they can connect t other networks, set the routers to use DNS server, configure network setting for WS_4 and make your router a web server.
ACL :
1. Gateway: allow all traffic except ping and FTP access from the internet
2. Core: only allow Core’s Ethernet network to access router Core via web
3. Distribute1: allow all traffic from Access1 to go in serial interface except ftp and tftp service to key network devices (lower IP half) of SW_2 Ethernet network
4. Distribute2: allow all traffic Access1 to go through except http and tftp service to key network devices (lower IP half) of Access1 Ethernet network
5. Access1: only allow key network devices(lower IP halves) in any subnets to telnet to router Access1