PDA

View Full Version : Co ai biet cai nay hong



tilucsi
06-11-2006, 11:57 AM
Khong biet co ai gap tinh hung nay bao gio chua ???
Cach xu ly the nao ???
Forus packet la gi vay ????

Tu R2 co the Ping duoc Sw, nhung tu SW kg the ping dc R2
Routing chay binh thuong

Sw3550 ------------- R1-------------------R2
1.0.0.1 -- 1.0.0.2 + 2.0.0.1 -- 2.0.0.2

Debug ip packet form Switch

Switch#ping 2.0.0.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.0.0.2, timeout is 2 seconds:

1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending full packet.
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending full packet
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, rcvd 2
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, stop process pak for forus packet.
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending full packet.
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, rcvd 2
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, stop process pak for forus packet
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending full packet
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, rcvd 2
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, stop process pak for forus packet.
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending full packet.
Success rate is 0 percent (0/5)
Switch#
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, rcvd 2
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, stop process pak for forus packet
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, rcvd 2
1d19h: IP: s=2.0.0.2 (Vlan1), d=1.0.0.1, len 100, stop process pak for forus packet

dangquangminh
06-11-2006, 07:52 PM
Hi

cấu hình của switch là như thế nào? Địa chỉ 1.0.0.1 là địa chỉ của interface vlan hay là địa chỉ của L3 port của switch?

tilucsi
07-11-2006, 03:31 AM
Em da lam ca 2 truong hop, lan luot tung cai. Nhung lan nao no cung bao the

dangquangminh
08-11-2006, 04:59 AM
hi

trong trường hợp em gán địa chỉ IP cho interface vlan 1 của switch, em có gán default-gateway chưa?

sw(config)#ip default-gateway 1.0.0.2

tilucsi
08-11-2006, 12:38 PM
Em co add roi thay , em nghi Switch da biet duong di roi.
Bang chung la:
1d19h: IP: s=1.0.0.1 (local), d=2.0.0.2 (Vlan1), len 100, sending full packet

Hic hic, forus packet la gi vay thay ????

thanhgiang23
08-11-2006, 02:04 PM
hi,
Ban cho SW routing bang protocol nao?
Hay ban co the cho minh chi tiet 1 chut ve cau hinh cua ca 3 con. Thx.

tilucsi
08-11-2006, 05:23 PM
Minh chay Rip don gian thoi.
Minh đa lam 2 truong hop
1) Switch kg chay routing, chi set dèault gateway
2) Swich chay Rip lun
Ket qua la` the same

toan_nguyen
09-11-2006, 12:03 AM
Minh nghi forus la for us, vi con 3550 nhan duoc packet gui cho ban than no.
Co the post config 3550 duoc khong?

tilucsi
09-11-2006, 01:02 PM
Minh hong nghi forus packet la for us:
Moi nguoi co the xem link nay
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutli ne%40%5E1%40%40.1ddb0402/0#selected_message

Minh se pót config con Switch len sau, thanx moi nguoi da giup do